|
|
| Brand Name: | XRTOOLS |
| Model Number: | 35mm |
| MOQ: | 500PCS |
| Price: | $0.8-12/PCS |
| Delivery Time: | 25-30 days |
| Payment Terms: | L/C, D/P, T/T, Western Union |
The Problem: In 35mm boring, the outer teeth travel a significantly greater distance per revolution than the center pilot. This creates a disparity in "Surface Feet Per Minute" (SFM), leading to extreme heat accumulation at the teeth while the center remains cool.
The Result: Standard bits experience "localized annealing," where the outer teeth soften and fail prematurely, even if the rest of the tool is intact. This results in uneven holes and frequent tool replacement in production environments.
Rotational Imbalance: At 35mm, even a 0.1mm deviation in mass distribution causes centrifugal forces that lead to "chatter." This vibration prevents the teeth from biting evenly.
Chip Clogging: Larger diameter cuts produce a high volume of metal waste. If the gullets are not optimized for this specific diameter, chips recirculate under the teeth, acting as an abrasive that grinds down the cutting edge.
Dynamic Mass Balancing: Our 35mm Master Series is precision-ground from a solid HSS M2 (W6Mo5Cr4V2) block. The weight distribution is digitally balanced to ensure zero-vobble performance at high RPMs, protecting both the tool and the drill motor from harmonic stress.
M2 Thermal Sink Technology: The high molybdenum content in our M2 steel acts as a thermal sink. It efficiently pulls heat away from the high-velocity perimeter teeth and dissipates it through the reinforced hub, maintaining a 64-66 HRC edge during continuous operation.
High-Flow Chip Channels: Every tooth features a 5-degree positive rake angle combined with deep-relief gullets. This "High-Flow" geometry ejects chips outward instantly, preventing the "re-cutting" of waste material and ensuring a cooler, faster boring process.
| Technical Pillar | Specification Detail | Industrial Benefit |
| Material Grade | HSS M2 (W6Mo5Cr4V2) | Durability: Maintains structural integrity up to 600°C. |
| Boring Accuracy | TIR (Runout) ≤ 0.12mm | Stability: Precise clearance for M40 and PG29 fittings. |
| Tooth Profile | Fully Ground Triple-Edge | Finish: Machine-finished edge, zero deburring required. |
| Safety Feature | Integrated Stopper Flange | Safety: Prevents damage to internal panel components. |
| Shank System | 10mm Fixed Hex Shank | Power Transfer: Eliminates slippage in high-torque loads. |
| Slug Ejection | Dual-Rate Compression Spring | Productivity: Reliable ejection of heavy 35mm slugs. |
Electrical Infrastructure: The industry-standard size for M40 electrical fittings and PG29 cable glands in heavy-duty stainless steel and alloy enclosures.
Mechanical Plant Maintenance: Precision boring for installing 35mm bearing seats, sensor housings, and ventilation ports in industrial machinery.
HVAC Commercial Systems: Ideal for creating entry points for secondary refrigerant lines and high-capacity sensors in thick-walled galvanized steel.
Material Versatility: Optimized for Stainless Steel (≤ 2.5mm), Cast Iron, Aluminum Alloy, and Reinforced Composites.
Speed Management: For 35mm in mild steel, maintain 220 - 300 RPM. For 304 Stainless Steel, reduce to 120 - 150 RPM to optimize the tool's red-hardness properties.
Lubrication Protocol: Due to the high SFM at the 35mm perimeter, the use of a cooling paste or high-viscosity oil is essential to facilitate chip flow and maintain the polished finish of the cut.
Q: Why is 35mm a preferred size for M40 transitions?
A: While 40mm is the outer diameter of the fitting, 35mm is often the required bore for the threaded transition or specific seal-gaskets in high-pressure industrial environments.
Q: Can this handle the torque of a 18V cordless drill?
A: Yes. The low-friction M2 ground teeth are designed to reduce the required amperage, making it highly efficient for cordless tools. However, always use the side handle for safety.
Q: Is the ejection spring replaceable?
A: Yes. The high-tension spring can be removed or replaced along with the 135° split-point center drill by loosening the integrated side grub screw.
Vacuum Hardening: Every tool is vacuum-hardened to a uniform 64-66 HRC to ensure consistent performance from the center pilot to the outer perimeter.
Monoblock Integrity: The one-piece design eliminates the mechanical failures associated with multi-part arbor systems.
Compliance: Manufactured to international engineering standards for high-precision industrial boring.
Video
Video
